The APP bitumen membrane, short for Atactic Polypropylene Membrane, is a special waterproofing material that is manufactured from Bitumen. They comes in rolls. Each roll measures 10 metres by 1 metre and covers an area of 8.7 m². With proper workmanship, the APP membrane is a very efficient and durable waterproofing material used in most constructions.

APP membrane can be applied for fresh roof slab, sunken slab, balconies, and basement.

Application method

APP Membranes applied as follows

  • Clean entries surface
  • Apply primer
  • Once the primer is completely dry, heat an stick APP membrane on the surface. Must provide an overlap of 10cm on both side.

APP membranes are not UV resistant. So a protective plastering or screading is must over the treated surface. Unless it is protected, membranes may de-bond from surface and water may enter in to sheet. This will cause the entire application get damaged

APP membrane waterproofing
APP membrane waterproofing

Explore More

Cementious waterproofing coating

Acrylic polymer cementious coating is applied for fresh concrete. If the concret slab is old, then we need to remove all protective plastering and screading for applying such coating. This

Read More

Polyurethane Injection Grouting

PU grouting is a specialised technique that involves the injection of expanding polyurethane to stop any water flowing down or through cracks or to fill voids under slabs, concrete joints or behind concrete walls and

Read More

Expansion Joint Sealing

Expansion joints are structural joints between two concrete structures to accomodate movements of each structure. This provide a fre movements upon thermal expansion. It is mandatory to provide such joints

Read More