Month: September 2020

Acrylic polymer cementious coating is applied for fresh concrete. If the concret slab is old, then we need to remove all protective plastering and screading for applying such coating. This coating must be protected by protective plastering or screading. If protected, this will last for a long time. Cementious waterproofing have an elongation of about 180%. Bridge cracks updto 1mm

This method can be applied to new terrace/roof before plastering, bathrooms, balconies, etc.

It is very important to waterproof bathrooms during its construction time. It is very difficult to arrest water seepage from an existing bathroom which is in use. The cost of wateproofing is very low if it is done at the time of construction. Remedial waterproofing for an existing bathroom is many times costlier and is a big burden. Structural waterproofing for a bathroom will cost less than 5% of the overall coat of a bathroom construction. So it is highly recommended to wateproofing the bathrooms during construction time only.

There are number of methods for wateproofing bathroom waterproofing. Commonly adopted adopted method is applying two coats of acrylic polymer compound. Waterproofing compounds are recommended.

Apart from acrylic polymer compound, we can use bitumen sheet (APP Membrane) for wateproofing floor area. For wall area we recommend acrylic polymer compound.

We need to provide a wateproofing coating for bathroom walls too at least one meter from floor level. About two meters from the floor level is recommended.

Apart from wateproofing, all pipe joints of a bathroom must be sealed with proper non shrink grouts.

We have a professional team for all your waterproofing needs. Our team will inspect and suggest the ideal solution to meet your requirements